The Comprehensive Guide to Channels for RC Airplanes - EXHOBBY

2 Kommentare

As a newcomer to the radio control flying hobby, learning about the primary rc airplane controls of your new plane is essential for becoming a good pilot, and getting the most out of your model.
Every operation that is controllable on an rc airplane is referred to as a 'channel'.

Overview of Channel Definition

Channel Type	Functions Included	Recommended For	Description
2-Channel	Throttle, Rudder	Kids or beginners	Basic control, suitable for new pilots. Dual motors allow for forward movement and left/right turns but may become dull for older users.
3-Channel	Throttle, Rudder, Elevator	Beginners (14+ years)	Introduces vertical control, allowing ascent and descent. Ideal for learning basic flying skills with more control than 2-channel models.
4-Channel	Throttle, Rudder, Elevator, Aileron	Experienced pilots	Adds roll control with ailerons, enabling more advanced maneuvers. Recommended for those with some flying experience.
5-Channel	Throttle, Rudder, Elevator, Aileron, Flap	Advanced pilots	Designed for larger planes, allows for additional features like flaps for better takeoff/landing, and can include functions like camera switches or landing gear.
6-Channel & Plus	Varies by model	Professional pilots	More channels allow for complex maneuvers and additional equipment control, tailored to specific flight needs.

2-Channel

The most basic plane type which is consist of throttle and rudder. It is simple to understand as entry-hobby level.

3-Channel

To get a true feeling and understanding of radio control flying, a RC plane with 3 chanels is more recommanded. With throttle, rudder and elevator, it obviously brings more controls to the plane to fly the way you want.

4-Channel

For RC pilots with plenty of skills, 4-channel planes are more popular. With the aileron included, you can fly the plane "like" a plane now.

5-Channel

The 5th channel is normally used for larger planes, which adds the flap to help landing and take off. The 5th channel is more flexible used not just as flap, any feature besides throttle, aileron, rudder, elevator can be considered as channel 5.

6-Channel and Plus

More channels added are common on professional RC planes, controlled by expert pilots. Depends on the features needed, more channels can be used as equipment switch, signal, etc.

There are no set rules as to how many channels a rc plane must have, it all comes down to the number of functions the pilot wants to have control over.

The control surfaces are hinged sections of the flying surfaces (wing, tailplane, and fin), and each control surface moves - up and down for elevators and ailerons, and left and right for rudders.

This movement changes the shape of the entire flying surface's airfoil, affecting the amount of lift/downforce/sideforce generated by that flying surface. The airplane reacts to these changes by changing its attitude and/or direction. By attitude, we mean the plane's orientation in relation to the horizontal. For instance, if the plane is pointing up, it has a nose-up attitude.

Feature of Each Channel (4 basic channels)

Throttle

Throttle controls motor speed and hence how fast or slow the propeller spins. In turn, this changes the amount of thrust produced.

Elevators

The elevators are the hinged section of the tailplane. They are also known as horizontal stabiliser located at the very rear of the airplane and are the single most important control surface. They directly effect the plane's airspeed.

Elevators control the horizontal pitch attitude of the airplane, in other words whether the nose of the plane points upwards or downwards. When elevators are deflected upwards the plane's nose is forced to point upwards, and with the elevators deflected downwards then the nose is forced downwards. This resulting nose up/nose down pitch attitude comes about as the upward/downward deflection of the elevators changes the amount of down force being generated by the tailplane.

Elevators should be used in conjunction with rudder and/or ailerons when making a turn, to maintain altitude during the turn and also to get the plane to bank during the turn.

Ailerons

Not all rc airplane controls include ailerons, in fact many 3-channel trainers use rudder instead. But where fitted, ailerons control the roll of the airplane about its longitudinal axis (imagine a straight line running through the centre of the fuselage, from nose to tail).Ailerons work in pairs and are found on the trailing (rear) edge of the wing, and they work opposite to each other i.e. when one aileron moves up, the other one moves down and vice versa. Ailerons are used in all aerobatic maneuvers that involve a rolling motion.

Rudder

The rudder is the hinged section of the fin, or vertical stabiliser, located at the back of the airplane. It's used for directional control by changing the yaw of the airplane, and works in the correct sense i.e. moving the rudder to the left causes the airplane to turn left and vice versa.Understanding the controls of your rc airplane, or any rc model, is critical if you want to enjoy your model to the fullest and get the most out of the hobby.

Control Surface	Movement Direction	Function	Description
Throttle	Forward/Reverse	Controls motor speed	Adjusts how fast the propeller spins, affecting thrust and speed of the airplane.
Elevators	Up/Down	Controls pitch (nose up/nose down)	Adjusts the plane's attitude by changing downforce on the tailplane; crucial for climbing and descending.
Ailerons	Up/Down (opposite sides)	Controls roll	Used in pairs to enable rolling maneuvers; essential for aerobatics and maintaining level flight during turns.
Rudder	Left/Right	Controls yaw (directional movement)	Adjusts the airplane's heading; moving left rudder turns the plane left and vice versa.

Different control channels RC airplanes

2 Channels RC Planes for Kids

Dual motors serve as the throttle and rudder, allowing you to manage forward (with automated climb up), left and right turns (with varied motor speeds). It is the most basic control type for new pilots to pick up. However, it will quickly become dull for adult and teenager pilots looking for additional difficulties and enjoyment. As a result, 2-channel aircrafts are primarily intended for children to learn the hobby under the supervision and assistance of experienced adults.

P-51D Mustang 2-Ch Beginner Airplane

3 Channels RC Planes for Beginners

Include the elevator and rudder on the tail. The motor will only control the throttle, the elevator will control the ascent and dive, and the rudder will control the left and right turns. It will assist new pilots in learning how to control an RC aircraft in a hobby-grade rather than toy-grade manner. It is recommanded to start with RC aircraft for pilots above the age of 14.

3CH Spitfire Remote Control Airplane for Beginners

4 Channels RC Planes for Experienced and Advanced Pilots

Now that the aileron is available with the other three channels. The aileron control allows the RC aircraft to perform more stunts, which is an important feature for most experienced pilots to use while flying. For pilots who have flown some time with less channel aircrafts, a small sized (40-60cm wingspan), 4 channel trainer is always advised.

VOLANTEXRC P51D Mustang 4Ch Beginner RC Airplanes

5 Channels RC Planes for Experienced and Advanced Pilots

Another feature flap is activated for improved landing and take-off. It is usually only possible on larger aircraft. However, the 5th channel can also be used for various functions such as camera switching, landing gear retract switch, and so on. So, when it talks about 5 channels, it generally means the pilot knows a lot about RC aircraft and is obtaining additional optional features for greater entertainment.

Phoenix 2400 5-Channel Glider with 2.4 Meter Wingspan